Yamaha YV-1605J Owner's Manual - Page 12

Assembly ⁄1 Attach the controller. There are two controller mounting pins on the high sound side of rail (1). Align the two holes in the controller mounts with these pins and hook the controller onto the pins one side at a time. Controller mounting pins High Sound Side Rail (1) Controller ⁄2 Connect the driver with the controller. Connect the MOTOR IN terminal of the driver with the MOTOR OUT terminal of the controller using the supplied 8P DIN cable*. To connect align the arrow mark ( ) on the plug with the screw next to the jack. Controller Screw Arrow Mark Driver 8P DIN Cable Screw Arrow Mark * In case the 8P DIN cable is misplaced, the following spare part may be ordered: Part No. W5 128092 Part Name 8P DIN Cable Specification L=220 27