Yamaha YV-1605J Owner's Manual - Page 13
Attach the round belt fan belt*., Pedal Stroke Adjustment, After assembly, confirm that each bolt
View all Yamaha YV-1605J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Assembly ⁄3 Attach the round belt (fan belt)*. Slip the round belt (fan belt) over the fan side pulley first, and then pull it over the flange of the driver pulley. * Note For Service Personnel If the belt cannot be mounted because the distance between the pulleys is too wide, or the belt slips due to a too narrow pulley distance, loosen the two driver positioning screws (see illustration below) to adjust the pulley distance (belt tension). Tighten the screws securely after adjustment. Fan Side Round Belt (Fan Belt) Driver Side Driver Positioning Screws Pulley Round Belt (Fan Belt) Pulley * In case the belt is misplaced or worn, the following spare part may be ordered: Part No. W5 128070 Part Name Fan Belt Specification 3ØL236 ⁄4 Pedal Stroke Adjustment Loosen the center rod fixing bolts to adjust the protruding length of the center rod to the desired pedal stroke, and retighten the bolts. The recommended stroke (distance between pedal and floor) is 9/16" to 13/16" (1.5 to 2 cm). Pedal 9/16" ~ 13/16" (1.5 ~ 2 cm) Floor ⁄5 After assembly, confirm that each bolt and screw is tightened securely. 28