Zanussi ZCG43050WA User Manual - Page 21

Installation

Get Zanussi ZCG43050WA PDF manuals and user guides View all Zanussi ZCG43050WA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) INSTALLATION ... WARNING! Refer to Safety chapters. TECHNICAL DATA Dimensions Height Width Depth 894 - 912 mm 550 mm 609 mm LOCATION OF THE APPLIANCE You can install your freestanding appliance with cabinets on one or two sides and in the corner. For the distances of fitting check the table. Dimension mm E 150 F less than 400 LEVELLING OF THE APPLIANCE A EF D B C Distances Dimension mm A 650 B 450 C 20 D 400 Use small feet on the bottom of appliance to set the appliance top surface level with other surfaces. THE STABILITY CHAIN CAUTION! Install the stability chain to prevent the appliance from tilting. The stability chain only works when the appliance is put in a correct area. 1. Measure down 180 mm from the appliance top surface, then measure right 30 mm. 2. Mark the position of the wall and this gives anchor point for the stability chain. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
INSTALLATION
WARNING!
Refer to Safety chapters.
TECHNICAL DATA
Dimensions
Height
894 - 912 mm
Width
550 mm
Depth
609 mm
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the distances of fitting check the table.
A
E
C
B
D
F
Distances
Dimension
mm
A
650
B
450
C
20
D
400
Dimension
mm
E
150
F
less than 400
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
THE STABILITY CHAIN
CAUTION!
Install the stability chain to
prevent the appliance from tilting. The
stability chain only works when the
appliance is put in a correct area.
1.
Measure down 180 mm from the appliance top
surface, then measure right 30 mm.
2.
Mark the position of the wall and this gives
anchor point for the stability chain.
21