Zanussi ZCG43050WA User Manual - Page 9

Hob - Hints And Tips, Hob - Care And Cleaning

Get Zanussi ZCG43050WA PDF manuals and user guides View all Zanussi ZCG43050WA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Make sure that you can move the crown a small distance from side to side. 2. Put the burner cap centrally on top of the crown. Make sure that the cap is correctly installed, with the enamel side up and you can move the cap from side to side and front to back. 3. Light the burner. If the burner does not ignite, adjust the crown and cap again. HOB - HINTS AND TIPS TURNING THE BURNER OFF To put the flame out, turn the knob to the off position . WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. WARNING! Refer to Safety chapters. COOKWARE WARNING! Do not put unstable or damaged pots on the burner to prevent spills and injuries. CAUTION! Make sure that pot handles are not above the front edge of the cooktop. CAUTION! Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption. HOB - CARE AND CLEANING DIAMETERS OF COOKWARE WARNING! Use cookware with diameters applicable to the size of burners. Burner Diameter of cookware (mm) Rapid 180 - 240 / 2601) Semi-rapid 120 - 220 / 240 Auxiliary 80 - 160 1) When a single pot is used on the hob WARNING! Refer to Safety chapters. GENERAL INFORMATION • Clean the hob after each use. • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Wash stainless steel parts with water, and then dry them with a soft cloth. PAN SUPPORTS The pan supports are not resistant to washing in a dishwasher. They must be washed by hand. 1. Remove the pan supports to easily clean the hob. Be very careful when you replace the pan supports to prevent the hob top from damage. 2. After you clean the pan supports, make sure that they are in correct positions. 3. For the burner to operate correctly, make sure that the arms of the pan supports are aligned with the centre of the burner. CLEANING THE HOB • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Make sure that you can move the crown a small
distance from side to side.
2.
Put the burner cap centrally on top of the
crown.
Make sure that the cap is correctly installed,
with the enamel side up and you can move the
cap from side to side and front to back.
3.
Light the burner.
If the burner does not ignite, adjust the crown and
cap again.
TURNING THE BURNER OFF
To put the flame out, turn the knob to the off
position
.
WARNING!
Always turn the flame
down or switch it off before you
remove the pans from the burner.
HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
COOKWARE
WARNING!
Do not put unstable or
damaged pots on the burner to
prevent spills and injuries.
CAUTION!
Make sure that pot
handles are not above the front edge
of the cooktop.
CAUTION!
Make sure that the pots
are placed centrally on the burner in
order to get the maximum stability and
a lower gas consumption.
DIAMETERS OF COOKWARE
WARNING!
Use cookware with
diameters applicable to the size of
burners.
Burner
Diameter of cookware
(mm)
Rapid
180 - 240 / 260
1)
Semi-rapid
120 - 220 / 240
Auxiliary
80 - 160
1)
When a single pot is used on the hob
HOB - CARE AND CLEANING
WARNING!
Refer to Safety chapters.
GENERAL INFORMATION
•
Clean the hob after each use.
•
Always use cookware with a clean base.
•
Scratches or dark stains on the surface have no
effect on how the hob operates.
•
Use a special cleaner suitable for the surface of
the hob.
•
Wash stainless steel parts with water, and then
dry them with a soft cloth.
PAN SUPPORTS
The pan supports are not resistant to
washing in a dishwasher. They must
be washed by hand.
1.
Remove the pan supports to easily clean the
hob.
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
2.
After you clean the pan supports, make sure
that they are in correct positions.
3.
For the burner to operate correctly, make sure
that the arms of the pan supports are aligned
with the centre of the burner.
CLEANING THE HOB
•
Remove immediately:
melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
dirt can cause damage to the hob. Take care to
avoid burns.
•
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
9