Zanussi ZCG55QGX Product Manaul - Page 17
Before you change the oven lamp
View all Zanussi ZCG55QGX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Stainless steel or aluminium appliances: Clean the oven door with a wet sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions Cleaning the top oven glass panels The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different. Removing the glass: 1. Open the door. 2. Push the door trim at both sides to release the clips. Refer to the picture. 3. Remove the glass panels. Removing the glass: 1. Push the door trim at one side to remove it. Refer to the picture. 2. Pull up the trim. 3. Remove the glass panels. A 2 1 1 2 1 To replace the glass obey the procedure in opposite sequence. Cleaning the oven door The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different. www.zanussi.com To replace the glass panels obey the procedure in opposite sequence. Before you lower the trim attach the A trim part to the door. Refer to picture. Oven lamp Warning! There is a danger of electrical shock! Before you change the oven lamp: • Switch off the oven. • Remove the fuses in the fuse box or switch off the circuit breaker. Put a cloth on the bottom of the oven for protection of the oven light and glass cover. Replacing the oven lamp 1. You can find the lamp glass cover at the back of the cavity. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the oven lamp with an applicable 300°C heat-resistant oven lamp. 17