Zanussi ZCG63250WA User Manual - Page 20

1 2 2. Pull the rear end of the shelf support away from the side wall and remove it. 1 2 Install the shelf supports in the opposite sequence. CAUTION! Make sure that the longer fixing wire is in the front. The ends of the two wires must point to the rear. Incorrect installation can cause damage to the enamel. 1 3. Pull the door trim to the front to remove it. 4. Remove the glass panels. To install the panels, do the same steps in reverse. REMOVING AND CLEANING THE DOOR GLASSES - MAIN OVEN The door glass in your product can be different in type and shape from the example you see in the image. The number of glasses can also be different. 1. Push the door trim at one side to remove it. A REMOVING AND CLEANING THE DOOR GLASSES - TOP OVEN The door glass in your product can be different in type and shape from the examples you see in the image. The number of glasses can also be different. 1. Open the door. 2. Hold the door trim on the top edge of the door at the two sides and push inwards to release the clip seal. 2 1 2. Pull up the trim. 3. Remove the glass panels. To replace the glass panels, do the same steps in reverse. Before you lower the trim, attach the A trim part to the door. Refer to the image. 20