Zanussi ZCG63250WA User Manual - Page 4

• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. SAFETY INSTRUCTIONS This appliance is suitable for the following markets: IE GB INSTALLATION WARNING! Only a qualified person must install this appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Do not pull the appliance by the handle. • The kitchen cabinet and the recess must have suitable dimensions. • Keep the minimum distance from other appliances and units. • Install the appliance in a safe and suitable place that meets installation requirements. • Parts of the appliance carry current. Close the appliance with furniture to prevent touching the dangerous parts. • The sides of the appliance must stay next to appliances or units with the same height. • Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened. • Make sure to install a stabilizing means in order to prevent tipping of the appliance. Refer to Installation chapter. ELECTRICAL CONNECTION WARNING! Risk of fire and electric shock. • All electrical connections should be made by a qualified electrician. • The appliance must be earthed. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Do not let mains cables touch or come near the appliance door or the niche below the appliance, especially when it operates or the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • If the mains socket is loose, do not connect the mains plug. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. • Fully close the appliance door before you connect the mains plug to the mains socket. GAS CONNECTION • All gas connections should be made by a qualified person. • Before installation, make sure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible. • Make sure that there is air circulation around the appliance. • The information about the gas supply is on the rating plate. 4