Zanussi ZCG63250WA User Manual - Page 23

Dimension mm F less than 400 LEVELLING OF THE APPLIANCE 2. Mark the position of the wall and this gives anchor point for the stability chain. 180 mm 30 mm Use small feet on the bottom of appliance to set the appliance top surface level with other surfaces. THE STABILITY CHAIN CAUTION! Install the stability chain to prevent the appliance from tilting. The stability chain only works when the appliance is put in a correct area. 1. Measure down 180 mm from the appliance top surface, then measure right 30 mm. GAS BURNERS OTHER TECHNICAL DATA WARNING! These instructions are only valid in the countries whose symbols appear on this booklet's cover. Gas category: Gas supply: Voltage: Frequency: I2H G20 (2H) 20 mbar 220-240 V 50 Hz BURNER NORMAL POWER kW Natural Gas INJECTOR MARK 1/100 mm Btu/h Auxiliary 1 70 Semi-rapid 1.9 96 Rapid 3 119 Top Oven 1.7 95 Main Oven 1.7 95 GAS CONNECTION Use a flexible pipe in compliance with the regulation in force. Make sure they do not come in touch with mobile parts and are not squeezed. 3412 6483 10236 5804 5804 23