Zanussi ZIAN644K User Manual - Page 14

To find the full range of cooker hoods which work with this function refer to our consumer website. CARE AND CLEANING WARNING! Refer to Safety chapters. GENERAL INFORMATION • Clean the hob after each use. • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Use a special scraper for the glass. CLEANING THE HOB • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the TROUBLESHOOTING dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. WARNING! Refer to Safety chapters. WHAT TO DO IF... Problem Possible cause Remedy You cannot activate or operate the hob. The hob is not connected to an electrical supply or it is connected incorrectly. The fuse is blown. You do not set the heat setting for 10 seconds. You touched 2 or more sensor fields at the same time. Pause operates. There is water or fat stains on the control panel. Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Activate the hob again and set the heat setting in less than 10 seconds. Touch only one sensor field. Refer to "Daily use". Clean the control panel. 14