Zanussi ZIAN644K User Manual - Page 16

Problem Possible cause Remedy and appear alternately. and appear alternately. You hear a beep sound, the indicators above blink and BoilAssist does not start. and a number come on. You can hear a constant beep noise. The pot is empty or contains some liquid other than water, e.g. oil. There is too much or too little water in the pot. You boiled some food other than water and potatoes. The boiling point was moved in time and BoilAssist could not work properly. None of the cooking zones is ready to be used with BoilAssist. There is some residual heat on the cooking zones you want to choose or they are still in use. There is an error in the hob. The electrical connection is incorrect. Avoid using the function with liquids other than water. Refer to "Hints and Tips". Only boil water and potatoes with the use of BoilAssist. Finish your previous cooking activities and choose a free cooking zone without any residual heat. Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation. IF YOU CANNOT FIND A SOLUTION... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated TECHNICAL DATA the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. RATING PLATE Model ZIAN644K Typ 61 B4A 00 AA Induction 7.35 kW Ser.Nr ZANUSSI PNC 949 595 698 00 220 - 240 V / 400 V 2N 50 - 60 Hz Made in Germany 7.35 kW 16