Zanussi ZIAN644K User Manual - Page 9
Count Down Timer
View all Zanussi ZIAN644K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BOILASSIST The function automatically adjusts the temperature of water so that it does not boil over once it reaches the boiling point. If there is any residual heat ( / / ) on the cooking zone you want to use, an acoustic signal is emitted and the function does not start. 1. Touch 2. Touch to activate the hob. to activate the function. A blinking appears for cooking zones on which you can presently use the function. 3. Touch the control bar of any available cooking zone for which you want to start the function (between the heat setting 1-9). The function starts. If you do not choose any cooking zone within 5 seconds the function does not activate. Once the function starts the indicators above the symbol come on one after another until the water reaches the boiling point. When the function detects the boiling point the hob emits an acoustic signal and the heat level automatically changes to 5. If all cooking zones are already in use or there is some residual heat on all of them, the hob emits a beep sound, the indicators above blink and the function does not start. To deactivate the function touch (the function deactivates and the heat setting goes down to 0) or touch the control bar and adjust the heat setting manually. The Pause function and lifting of the pot deactivate BoilAssist. AUTOMATIC HEAT UP Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat setting. After 3 seconds comes on. To deactivate the function: change the heat setting. POWERBOOST This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. Refer to "Technical data" chapter. To activate the function for a cooking zone: touch . comes on. To deactivate the function: change the heat setting. TIMER Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session. First set the heat setting for the cooking zone then set the function. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. To activate the function or change the time: touch or of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down. To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. To deactivate the function: set the cooking zone with and touch . The remaining time counts back to 00. The indicator of the cooking zone goes out. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. To stop the sound: touch . 9