Zanussi ZWG6161P Product Manaul - Page 15
Super Quick
View all Zanussi ZWG6161P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Automatic Spin reduction and By selecting a programme, the appliance proposes automatically the maxi- Rinse Hold mum spin speed provided for that programme. By selecting Automatic Spin reduction ( ) the spin speed is reduced to a half, but not less than 400 rpm. The relevant light illuminates. Rinse Hold Spin By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be neces- sary to empty out the water. To empty out the water, please read the paragraph «At the end of the pro- gramme». 4 Super Quick Super Quick By pressing this button the corresponding pilot light illuminates. Short cycle for lightly soiled items or for laundry which needs only freshening up. With this option, a reduced load of laundry is recommended: • Cottons 3 kg • Synthetics and delicates 1,5 kg 3 Extra Rinse + 4 Super Spin Quick This appliance is designed for saving water. However, for people with very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water. Press simultaneously the buttons 3 and 4 for some seconds: the pilot light 7.2 comes on. This function stays permanently on. To remove it press the same buttons again until the pilot light 7.2 goes off. 5 Delay Start 3h 6h 9h Delay Start The start of the programme can be delayed by 9, 6 or 3 hours by means of this button. The relevant light illuminates. You must select this option after you have set the programme and before you start the programme. Select a delayed start: • select the programme and the required options; • select the delay start by pressing the button 5; • press the button 6: - the appliance starts its hourly countdown. - The programme will start after the selected delay has expired. Cancelling the delayed start after having started the programme: • set the appliance to PAUSE by pressing the button 6; • press the button 5 once, the light relevant to the selected delay goes off; • press the button 6 again to start the programme. The DELAY START cannot be selected with the drain programme. 15