Zanussi ZWG6161P Product Manaul - Page 4
Frost precaution, Environment concerns
View all Zanussi ZWG6161P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical. Frost precaution If the appliance is installed in a place where the temperature could drop below 0°C, proceed as follows to remove any water remaining inside the appliance: 1. unplug the appliance; 2. turn off the water tap; 3. unscrew the water inlet hose from the tap; 4. unscrew the drain hose from the rear support and unhook it from sink or spigot; 6. let the drain hose run along the floor, place the external extremities of the drain and inlet hoses in the bowl placed on the floor and let water drain out completely; 7. screw the water inlet hose to the tap and the drain hose to the rear of the appliance again; When you intend to start the appliance up again, make sure that the room temperature is above 0°C. 5. place a bowl on the floor; Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging materials The materials marked with the symbol >PEPS