Zenith SL-4192-BK User Guide - Page 2

Mode Switching Summary INSTALLATION TEST ON-TIME Switch at 1, 5, or 10 minutes AUTO MANUAL MODE Flip light switch off for one second then back on* For best performance, mount the fixture about 6 feet (1.8 m) above the ground. WARNING: Turn power off at circuit breaker or fuse. * If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode. DualBrite® Dimmer Control Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., until dawn). Selecting OFF disables this feature.The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 10 minutes) then returns to dim mode. 1. Remove two nuts. 3. Tighten screws finger tight. 2. Remove X-Bar. SENSITIVITY MIN MAX 4. Set sensitivity on fixture back to the mid-position. 5. Attach X-Bar to junction box Junction Box Due to the size and weight of the fixture, you may find it helpful to have an assistant hold the fixture in place while connecting the wires.  595-5628-08