Zenith SL-4192-BK User Guide - Page 6

TESTING The detector is less sensitive to motion di- ❒ Turn on the circuit breaker and light rectly towards it and more sensitive to across switch. motion. NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion.When first turned on, wait 1 1/2 minutes. Motion Motion Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off. ❒ Switch the on-time to TEST position and DualBrite® switch to the OFF position. TEST 1 5 10 MIN ON-TIME OFF 3 6 DUSK TO HOUR DAWN Avoid aiming the control at: • Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering. • Areas where pets or traffic may trigger the control. • Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor. Sensor Least Sensitive Most Sensitive ❒ Walk through the coverage area noting where you are when the lights turn on. ❒ If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may increase false triggering. ❒ Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes). ❒ Set the amount of time after dusk you want the lights on accent level. 6 ft. (1.8 m) 180° 30 ft. (9.1 m) Maximum Range Maximum Coverage Angle  595-5628-08