Zenith SL-5511-BZ User Guide - Page 1

Zenith SL-5511-BZ - Heath - Quartz Motion-Sensing Light Manual

Page 1 highlights

OPERATION Compact 150 Watt Motion Sensing Halogen Mode: Test Auto Manual On-Time 5 Seconds 1, 5, or 10 Min Until Dawn* Works: Day Night xx x x * resets to Auto Mode at dawn. Note: When first turned on wait about 11/2 minutes for the circuitry to calibrate. Model SL-5511 The Motion Sensor Quartz Security Light turns on 150 watts of quartz-halogen lighting when motion is detected and then, after a selectable period of time, automatically turns the lighting off. The built-in photocell keeps the lighting off during daylight hours. This package includes: TEST Put the ON-TIME switch on the bottom of the sensor in the TEST position. ON-TIME 10 5 1 TEST AUTO Put the ON-TIME switch in the 1, 5, or 10 minute position. ON-TIME 10 5 1 TEST MANUAL MODE Cover Plate Gasket Cover Plate 4 Screws (2 sizes) Halogen Bulb Sensor Light Fixture 3 Wire Connectors Requirements • The light control requires 120-volts AC. Do not connect through a dimmer or other electronic switch. • If you want to use Manual Mode, the control must be wired through a switch. • Some codes require installation by a qualified electrician. • This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations. • The backplate has knockouts so the sensor can be mounted on most junction boxes. • In some applications a universal adaptor plate may be needed. Adaptors are available at Home Centers and Electrical Supply Stores. Manual mode only works at night because daylight returns the sensor to AUTO. Flip the light switch off for one second 1 Second OFF then back on to toggle between AUTO then... and MANUAL MODE. Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position. ... back on. Mode Switching Summary TEST AUTO MANUAL MODE Move ON-TIME Switch to 1, 5, or 10 minutes Flip switch off for one second then back on* * If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time (11/2 min.) the control will be in the AUTO mode. © 2007 HeathCo LLC 595-5574-06

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Compact 150 Watt
Motion Sensing Halogen
Model SL-5511
The Motion Sensor Quartz Security Light turns on 150
watts of quartz-halogen lighting when motion is detected
and then, after a selectable period of time, automati-
cally turns the lighting off. The built-in photocell keeps
the lighting off during daylight hours.
Cover
Plate
Sensor
3 Wire
Connectors
4 Screws
(2 sizes)
Light Fixture
Cover Plate
Gasket
© 2007 HeathCo LLC
595-5574-06
Halogen
Bulb
OPERATION
Move ON-TIME Switch
to 1, 5, or 10 minutes
Mode Switching Summary
Flip switch off for
one second then
back on*
* resets to Auto Mode at dawn.
TEST
AUTO
MANUAL MODE
ON-TIME
ON-TIME
Requirements
• The light control requires 120-volts AC.
Do not
con-
nect through a dimmer or other electronic switch.
• If you want to use Manual Mode, the control must be
wired through a switch.
Some codes require installation by a qualified
electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may
be needed. Adaptors are available at Home Centers
and Electrical Supply Stores.
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the
calibration time (1
1
/
2
min.) the control will be in the
AUTO mode.
10 5 1
TEST
10 5 1
TEST
MANUAL MODE
AUTO
TEST
... back on.
1 Second OFF
then
...
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
This package includes:
Note:
When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
Until Dawn*
x