ZyXEL B-400 User Guide - Page 19

11Mbps Wireless Ethernet Adapter User's Manual 4. Configuring the Ethernet Adapter The Info Tab (Connected with wireless LAN) (NOT Connected with any wireless LAN) SSID: displays current SSID this adapter uses. If the adapter found no AP or any other ad-hoc device, then SSID will show "non-spec" . Please make sure that your wireless LAN is working properly under the effective reach range of the adapter Channel: displays the channel that the adapter uses now. BSSID: displays MAC address of the AP that the adapter is connecting with. Transmission Rate: the transfer data rate that the adapter is using in wireless LAN Link Quality (%): displays the wireless LAN connection integrity when connected to an AP. MAC address: displays the unique serial number burned into the adapter that identifies itself from other Ethernet devices. IP address: displays the adapter's current IP address assigned by AP or router. Firmware Revision: displays the adapter's current firmware version Results of the most recent scan: displays the recent scan over the wireless LAN, and information of the found and reachable APs will be listed When you re-load the web page, the result will be updated once again. 19