ZyXEL B-400 User Guide - Page 7

11Mbps Wireless Ethernet Adapter User's Manual 2.Hardware Installation Physical Details Rear Panel INIT Button LAN Cable Selection Switch LAN Connection Power Input INIT Button LAN Cable Selection Switch "INIT" mean "Initiation". While pressing the button, the adapter will reboot and reset current settings to factory default settings. The left indicator "DIAG" on adapter will be off and then begin blinking. Then this initiation action will be completed when the indicator " DIAG" is always green instead of blinking. X Crossover: the RJ-45 port Tx and Rx lines are reversed. Use this setting when you use the supplied straight cable connected to PC. It is also the factory default setting. II Straight: the RJ-45 port Tx and Rx lines are normal. Use this setting when you have the supplied straight cable connected to Hub/switch Power Input Only use the power adapter supplied with the Ethernet adapter LAN Connection Use standard Ethernet cable (RJ-45 connector) to connect your PC, hub/switch or broadband router/modem to this port. 7