ZyXEL B-400 User Guide - Page 22

11Mbps Wireless Ethernet Adapter User's Manual The Server Tab IP Address Mode: Select "Static" or "DHCP" mode. For "Static" mode, the IP address settings are given by user. For "DHCP" mode, IP settings will be overridden by a DHCP server on your network. The default setting is "Static" IP Address: The static IP address you may assign to the adapter. The default value is "169.254.100.100". IP Subnet: The subnet mask you want to assign for the adapter. The default value is "255.255.0.0". IP Gateway: The gateway you want to assign for the adapter. The default value is "169.254.1.254". Allow upgrade uploads: Check the box, and then it is allowed to upgrade firmware. Note! You may need to reboot the adapter, and then re-load the page to see any new settings. The Admin Tab Change password: Default password is "1234". For security concerns, please change it after finish the configuration. Reboot Adapter: When any setting was changed, the adapter MUST be reboot so that the change can be confirmed. Reset to factory defaults: This option will ERASE all the current settings, and restore to the factory default settings. Note! You may need to reboot the adapter, and then re-load the page to see any new settings. 22