ZyXEL G-320H User Guide - Page 53
Infrastructure, Ad-Hoc, WPA-PSK, Disabled, To associate to an ad-hoc network
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 4 Wireless Station Mode Configuration " 2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hoc network type in the previous screen, a screen displays as follows. Select a channel number and click Next to continue. To associate to an ad-hoc network, you must use the same channel as the peer computer. Figure 32 Station Mode: Profile: Select a Channel The following table describes the labels in this screen. Table 13 Station Mode: Profile: Select a Channel LABEL DESCRIPTION Wireless Settings Channel Select a channel number from the drop-down list box. To associate with an ad-hoc network, you must use the same channel as the peer computer. Wireless Mode This displays b+g and allows the G-320H to connect to either an IEEE 802.11g or IEEE 802.11b wireless device. 3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA, WPA2-PSK, WPA2 or 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled to allow the G-320H to communicate with the access points or other peer wireless computers without any data encryption and skip to step 5. G-320H User's Guide 53