ZyXEL MAX208M2W User Guide - Page 37
Network Setting > LAN > DHCP, Server, Network Setting > WAN, Operation Mode
View all ZyXEL MAX208M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 4 Tutorials 4 Log into the Web Configurator and open the Network Setting > LAN > DHCP screen. 5 Select Server for the DHCP mode, then enter 192.168.100.10 and 192.168.100.30 as your DHCP starting and ending IP addresses. 6 Leave the other settings as their defaults and click Save. 7 Next, go to the Network Setting > WAN screen and select NAT in the Operation Mode field. Click Save. 8 Connect your computers to the WiMAX Device's Ethernet ports and you're all set! Note: You may need to configure the computers on your LAN to automatically obtain IP addresses. For information on how to do this, see Appendix B on page 209. WiMAX Device Configuration User's Guide 37
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
37
4
Log into the Web Configurator and open the
Network Setting > LAN > DHCP
screen.
5
Select
Server
for the DHCP mode, then enter 192.168.100.10 and 192.168.100.30 as your DHCP
starting and ending IP addresses.
6
Leave the other settings as their defaults and click
Save
.
7
Next, go to the
Network Setting > WAN
screen and select
NAT
in the
Operation Mode
field.
Click
Save
.
8
Connect your computers to the WiMAX Device’s Ethernet ports and you’re all set!
Note: You may need to configure the computers on your LAN to automatically obtain IP
addresses. For information on how to do this, see
Appendix B on page 209
.