ZyXEL MAX208M2W User Guide - Page 98
EtherIP, 7.6 IP, IP
View all ZyXEL MAX208M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 7 Network Setting This screen contains the following fields: Table 28 GRE LABEL Peer IP Address DESCRIPTION Enter the IP address of the GRE peer. 7.5 EtherIP Use these settings to configure the peer setting of the EtherIP tunnel between the WiMAX Device and another EtherIP peer. Click Network Setting > WAN > EtherIP to open this screen as shown next. Figure 46 EtherIP Screen This screen contains the following fields: Table 29 EtherIP LABEL DESCRIPTION Peer IP Address Enter the IP address of the EtherIP peer. 7.6 IP Use these settings to configure the LAN connection between the WiMAX Device and your local network. Click Network Setting > LAN > IP to open this screen as shown next. Figure 47 IP Screen This screen contains the following fields: Table 30 IP LABEL IP address IP Subnet Mask DESCRIPTION Enter the IP address of the LAN interface for the WiMAX Device. Enter the IP subnet mask of the LAN interface for the WiMAX Device. 98 WiMAX Device Configuration User's Guide