ZyXEL MAX208M2W User Guide - Page 58
Scenario 5
View all ZyXEL MAX208M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 4 Tutorials 2 Next, configure the Name, VID and Ports for the Filter Setting. Interfaces LAN1 and WiMAX are Trunk links. On the WiMAX interface, the WiMAX Device will recognize VLAN 5 tagged packets it receives from the VLAN supporting switch. VLAN tagged packets will also be forwarded out of this interface. On the LAN1 interface, the WiMAX Device will tag packets it receives so that they are recognized in VLAN 5. On LAN1, tagged packets will be untagged when they are forwarded out since PC A does not support VLAN tagged packets. Interface IAD is configured as an Access port, so tagged packets will be untagged when they are forwarded. 4.12.5 Scenario 5 In this scenario, PC A is directly connected to interface LAN1 on the WiMAX Device. PC B is on VLAN 5 while PC C is on VLAN 10. PC B is connected to interface WiMAX and interface IAD for managing the WiMAX Device, through VLAN supporting switch S1. PC C is connected to interface WiMAX through VLAN supporting switch S1. 58 WiMAX Device Configuration User's Guide