ZyXEL MAX208M2W User Guide - Page 51
Scenario 1, Network Setting, Get IP Method, WAN IP Address, WAN IP Subnet Mask
View all ZyXEL MAX208M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 4 Tutorials Click Network Setting > WAN. Change the WiMAX Device to bridge mode and then click Save. If you cannot obtain IP address settings from a WAN DHCP server, select User as the Get IP Method and enter the WAN IP Address, WAN IP Subnet Mask and Gateway IP Address. 4.12.1 Scenario 1 In this scenario, PC A is connected directly to interface LAN1 on the WiMAX Device. PC B is connected to interface WiMAX and interface IAD for managing the WiMAX Device. Figure 16 VLAN Configuration Example 1 A B No VLAN Tag No VLAN Tag Manager IP: No VLAN Tag LAN: Transparent User Network Transparent CPE No VLAN Tag LAN No VLAN Tag No VLAN Tag PC Manager IP No VLAN Tag Network operators WiMAX Device Configuration User's Guide 51
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
51
Click
Network Setting
>
WAN
. Change the WiMAX Device to bridge mode and then click
Save
. If
you cannot obtain IP address settings from a WAN DHCP server, select
User
as the
Get IP Method
and enter the
WAN IP Address
,
WAN IP Subnet Mask
and
Gateway IP Address
.
4.12.1
Scenario 1
In this scenario, PC A is connected directly to interface LAN1 on the WiMAX Device. PC B is
connected to interface WiMAX and interface IAD for managing the WiMAX Device.
Figure 16
VLAN Configuration Example 1
A
B
No VLAN Tag
No VLAN Tag
No VLAN Tag
CPE
LAN
Manager IP
No VLAN Tag
No VLAN Tag
No VLAN Tag
User Network
PC
Manager IP: No VLAN Tag
LAN: Transparent
Network
operators
Transparent