ZyXEL MES3500-24 User Guide - Page 219

Chapter 26 IP Source Guard ID as an existing static binding, the new static binding replaces the original one. To open this screen, click Advanced Application > IP Source Guard > Static Binding. Figure 113 IP Source Guard Static Binding The following table describes the labels in this screen. Table 76 IP Source Guard Static Binding LABEL MAC Address IP Address VLAN Port Add Cancel Clear Index MAC Address IP Address Lease Type DESCRIPTION Enter the source MAC address in the binding. Enter the IP address assigned to the MAC address in the binding. Enter the source VLAN ID in the binding. Specify the port(s) in the binding. If this binding has one port, select the first radio button and enter the port number in the field to the right. If this binding applies to all ports, select Any. Click this to create the specified static binding or to update an existing one. Click this to reset the values above based on the last selected static binding or, if not applicable, to clear the fields above. Click this to clear the fields above. This field displays a sequential number for each binding. This field displays the source MAC address in the binding. This field displays the IP address assigned to the MAC address in the binding. This field displays how long the binding is valid. This field displays how the Switch learned the binding. VLAN Port Delete Cancel static: This binding was learned from information provided manually by an administrator. This field displays the source VLAN ID in the binding. This field displays the port number in the binding. If this field is blank, the binding applies to all ports. Select this, and click Delete to remove the specified entry. Click this to clear the Delete check boxes above. MES3500-24/24F User's Guide 219