ZyXEL NBG-419N User Guide - Page 76
Push Button Configuration PBC - driver
View all ZyXEL NBG-419N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 10 Tutorials • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the NBG-419N's interface. See Section 10.3.2 on page 77. This is the more secure method, since one device can authenticate the other. 10.3.1 Push Button Configuration (PBC) 1 Make sure that your NBG-419N is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG-419N's Web Configurator and press the Push Button button in the Network > Wireless Client > WPS Station screen. Note: Your NBG-419N has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The NBG-419N sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG-419N securely. 76 NBG-419N User's Guide