ZyXEL NWA-3500 Quick Start Guide - Page 4
Connect the Hardware, 1 LEDs - zyair
View all ZyXEL NWA-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ENGLISH 1 Connect the Hardware 1 Using an Ethernet cable, connect the ETHERNET port to a computer for initial configuration. 2 Connect the POWER 12VDC socket to a power source using only the included power adaptor. " Connect the NWA-3500's ETHERNET port to an Ethernet jack with network access after you have completed the initial configuration. 1.1 LEDs The WDS/SYS LED blinks red while the NWA-3500 is starting up. When the NWA-3500 is ready, the ZyAIR LED turns on and blinks when there is traffic. 4
ENGLISH
4
1 Connect the Hardware
1
Using an Ethernet cable, connect the
ETHERNET
port to a computer for initial
configuration.
2
Connect the
POWER
12VDC
socket to a power source using only the included power
adaptor.
Connect the NWA-3500’s
ETHERNET
port to an Ethernet jack with network
access after you have completed the initial configuration.
1.1 LEDs
The
WDS/SYS
LED blinks red while the NWA-3500 is starting up. When the NWA-3500 is
ready, the
ZyAIR
LED turns on and blinks when there is traffic.