ZyXEL NWA-3500 Quick Start Guide - Page 6
Log Into the Web Configurator, ETHERNET - default password
View all ZyXEL NWA-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ENGLISH 2.2 Log Into the Web Configurator " Even though you can connect to the NWA-3500 wirelessly, it is recommended that you connect your computer to the ETHERNET port for initial configuration. 1 Launch your web browser. Enter 192.168.1.2 (the NWA-3500's default IP address) as the address. V If you cannot access the Web configurator, make sure the IP addresses and subnet masks of the NWA-3500 and the computer are in the same IP address range (see Section 2.1). 2 Click Login (the default password 1234 is already entered). 3 Change the login password by entering a new password and clicking Apply. Be sure to record the new password and keep it in a safe place. 6
ENGLISH
6
2.2 Log Into the Web Configurator
Even though you can connect to the NWA-3500 wirelessly, it is
recommended that you connect your computer to the
ETHERNET
port for
initial configuration.
1
Launch your web browser. Enter
192.168.1.2
(the NWA-3500’s
default IP address) as the address.
If you cannot access the Web configurator, make sure the IP addresses
and subnet masks of the NWA-3500 and the computer are in the same IP
address range (see Section 2.1).
2
Click
Login
(the default password
1234
is already entered).
3
Change the login password by
entering a new password and
clicking
Apply
. Be sure to record the
new password and keep it in a safe
place.