ZyXEL NWA3560-N User Guide - Page 270
Internet Access
View all ZyXEL NWA3560-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Chapter 21 Troubleshooting 1 Make sure you have entered the user name and password correctly. The default password is 1234. This fields are case-sensitive, so make sure [Caps Lock] is not on. 2 You cannot log in to the web configurator while someone is using Telnet to access the NWA3000-N series AP. Log out of the NWA3000-N series AP in the other session, or ask the person who is logged in to log out. 3 Disconnect and re-connect the power adaptor or PoE power injector to the NWA3000-N series AP. 4 If this does not work, you have to reset the device to its factory defaults. See Section 21.6 on page 277. I cannot access the NWA3000-N series AP via the console port. 1 Check to see if the NWA3000-N series AP is connected to your computer's console port. 2 Check to see if the communications program is configured correctly. The communications software should be configured as follows: VT100 terminal emulation. 115200 bps is the default speed on leaving the factory. Try other speeds in case the speed has been changed. No parity, 8 data bits, 1 stop bit, data flow set to none. I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload new firmware. See the troubleshooting suggestions for I cannot see or access the Login screen in the web configurator. Ignore the suggestions about your browser. 21.4 Internet Access I cannot access the Internet. 270 NWA3000-N Series User's Guide