ZyXEL NWA5123-AC HD User Guide - Page 199
Configuration > Log & Report > Log Setting > Edit System Log Setting
View all ZyXEL NWA5123-AC HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Chapter 18 Log and Report The following table describes the labels in this screen. Table 88 Configuration > Log & Report > Log Setting > Edit System Log Setting LABEL DESCRIPTION E-Mail Server 1/2 Active Mail Server SSL/TLS Encryption Select this to send log messages and alerts according to the information in this section. You specify what kinds of log messages are included in log information and what kinds of log messages are included in alerts in the Active Log and Alert section. Type the name or IP address of the outgoing SMTP server. Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want encrypted communications between the mail server and the Zyxel Device. Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS. Select No to not encrypt the communications. Mail Server Port Enter the same port number here as is on the mail server for mail traffic. Mail Subject Type the subject line for the outgoing e-mail. Select Append system name to add the Zyxel Device's system name to the subject. Select Append date time to add the Zyxel Device's system date and time to the subject. Send From Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Send Log To Type the e-mail address to which the outgoing e-mail is delivered. Send Alerts To Type the e-mail address to which alerts are delivered. Sending Log Select how often log information is e-mailed. Choices are: When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full. Day for Sending Log This field is available if the log is e-mailed weekly. Select the day of the week the log is emailed. Time for Sending Log This field is available if the log is e-mailed weekly or daily. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. SMTP Authentication Select this check box if it is necessary to provide a user name and password to the SMTP server. User Name This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. Password This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Active Log and Alert System log Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the Zyxel Device will e-mail logs to them. enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The Zyxel Device does not e-mail debugging information, even if this setting is selected. NWA/WAC/WAX Series User's Guide 199