ZyXEL NWA5123-AC HD User Guide - Page 221
Antenna Switch, 22.1 Overview, 22.1.1 What You Need To Know, 22.2 Antenna Switch Screen
View all ZyXEL NWA5123-AC HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
CHAPTER 22 Antenna Switch 22.1 Overview Use this screen to adjust coverage depending on the orientation of the antenna. 22.1.1 What You Need To Know Positioning the antennas properly increases the range and coverage area of a wireless LAN. On the Zyxel Device that comes with internal antennas and also has an antenna switch, you can adjust coverage depending on the antenna orientation for the Zyxel Device radios using the web configurator, the command line interface (CLI) or a physical switch. Check Section 1.4 on page 19 to see if your Zyxel Device has an antenna switch. Figure 136 WAC Physical Antenna Switch Note: With the physical antenna switch, you apply the same antenna orientation settings to both radios. You can set the radios to have different settings while using the Web Configurator or the command line interface. Note: The antenna switch in the Web Configurator has priority over the physical antenna switch after you Enable Software Control in the Maintenance > Antenna screen. By default, software control is disabled. 22.2 Antenna Switch Screen To access this screen, click Maintenance > Antenna. The screen varies depending on whether the Zyxel Device has a physical antenna switch or allows you to change antenna orientation settings on a per-radio basis or on a per-AP basis. NWA/WAC/WAX Series User's Guide 221