ZyXEL NWA5123-AC HD User Guide - Page 41
Color, Status, Description - power supply
View all ZyXEL NWA5123-AC HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 Hardware Figure 17 NWA110AX, WAX510D and WAX650S LED The following are the LED descriptions for your NWA110AX, WAX510D and WAX650S. Table 12 NWA110AX, WAX510D and WAX650S LED COLOR STATUS DESCRIPTION Amber Green Blinks amber for 1 second and green for 1 second alternatively. The Zyxel Device is booting up or is connecting with NCC. Amber Green Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. The Zyxel Device is discovering the NCC or an AC. Amber Green Blinks amber and green alternatively 2 times and then turns solid green for 3 seconds. The Zyxel Device is managed by an AC but the uplink is disconnected. Green Slow Blinking (On for 1 second, Off for 1 second) The wireless module of the Zyxel Device is disabled or fails, the Zyxel Device is using default wireless settings, or the Zyxel Device is configured to be managed by NCC but is not yet registered with the NCC. Green Steady On Note: WiFi networks on the WAX650S are turned off automatically when it is connected to a device that supplies power using IEEE 802.3af PoE. The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in full power mode (see Table 26 on page 67). NWA/WAC/WAX Series User's Guide 41