ZyXEL P-100 Quick Start Guide - Page 19
Windows NT Quick Start
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Prestige 100MH Quick Start Guide Chapter 4 Windows NT Quick Start This chapter shows you the step-by-step instructions to configure your Windows NT workstations for Internet access. 4.1 TCP/IP Installation You must first install TCP/IP protocol on each Windows NT workstation before you can use it to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration section on page 15; otherwise, follow these steps: Step 1. From the Start Menu, select Settings then open Control Panel. Step 2. Double -click the Network icon to open the Network control panel. Step 3. Select the Protocolstab, then click the Add... button. 15
Prestige 100MH Quick Start Guide
15
Chapter 4
Windows NT Quick Start
This chapter shows you the step-by-step instructions to configure your Windows NT
workstations for Internet access.
4.1
TCP/IP Installation
You must first install TCP/IP protocol on each Windows NT workstation before you can use it
to access the Internet. If you have already installed TCP/IP, skip to the
TCP/IP Configuration
section on page 15; otherwise, follow these steps:
Step 1.
From the
Start Menu
, select
Settings
then open
Control Panel
.
Step 2.
Double-click the
Network
icon to open the
Network
control panel.
Step 3.
Select the
Protocols
tab, then click the
Add…
button.