ZyXEL P-660H-T3 v2 User Guide - Page 178
TR-069
View all ZyXEL P-660H-T3 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Chapter 14 Remote Management Configuration Figure 94 Remote Management: ICMP The following table describes the labels in this screen. Table 68 Remote Management: ICMP LABEL DESCRIPTION ICMP Internet Control Message Protocol is a message control and error-reporting protocol between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP) datagrams, but the messages are processed by the TCP/IP software and directly apparent to the application user. Respond to Ping on The ZyXEL Device will not respond to any incoming Ping requests when Disable is selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming LAN and WAN Ping requests. Do not respond to requests for unauthorized services Select this option to prevent hackers from finding the ZyXEL Device by probing for unused ports. If you select this option, the ZyXEL Device will not respond to port request(s) for unused ports, thus leaving the unused ports and the ZyXEL Device unseen. By default this option is not selected and the ZyXEL Device will reply with an ICMP Port Unreachable packet for a port probe on its unused UDP ports, and a TCP Reset packet for a port probe on its unused TCP ports. Note that the probing packets must first traverse the ZyXEL Device's firewall mechanism before reaching this anti-probing mechanism. Therefore if the firewall mechanism blocks a probing packet, the ZyXEL Device reacts based on the corresponding firewall policy to send a TCP reset packet for a blocked TCP packet or an ICMP port-unreachable packet for a blocked UDP packets or just drop the packets without sending a response packet. Apply Click Apply to save your customized settings and exit this screen. Cancel Click Cancel to begin configuring this screen afresh. 14.10 TR-069 TR-069 is a DSL Forum standard that defines how CPE (Customer Premise Equipment), for example your ZyXEL Device, can be managed over the WAN by an Auto Configuration Server (ACS) such as ZyXEL's CNM Access. TR-069 is based on sending RPCs (Remote Procedure Call) between an ACS and a client device. RPCs are sent in XML (Extensible Markup Language) format over HTTP or HTTPS. An administrator can use CNM Access to remotely set up the ZyXEL device, modify settings, perform firmware upgrades as well as monitor and diagnose the ZyXEL device. All you have to do is enable the device to be managed by CNM Access and specify the CNM Access IP address or domain name and username and password. 178 P-660H-Tx v2 User's Guide