ZyXEL UAG2100 User Guide - Page 93

Chapter 7 Monitor The following table describes the labels in this screen. Table 21 Monitor > System Status > Port Statistics LABEL Poll Interval Set Interval Stop Switch to Graphic View # Port Status DESCRIPTION Enter how often you want this window to be updated automatically, and click Set Interval. Click this to set the Poll Interval the screen uses. Click this to stop the window from updating automatically. You can start it again by setting the Poll Interval and clicking Set Interval. Click this to display the port statistics as a line graph. This field displays the port's number in the list. This field displays the physical port number. This field displays the current status of the physical port. Down - The physical port is not connected. TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time System Up Time Speed / Duplex - The physical port is connected. This field displays the port speed and duplex setting (Full or Half). This field displays the number of packets transmitted from the UAG on the physical port since it was last connected. This field displays the number of packets received by the UAG on the physical port since it was last connected. This field displays the number of collisions on the physical port since it was last connected. This field displays the transmission speed, in bytes per second, on the physical port in the one-second interval before the screen updated. This field displays the reception speed, in bytes per second, on the physical port in the one-second interval before the screen updated. This field displays how long the physical port has been connected. This field displays how long the UAG has been running since it last restarted or was turned on. 7.2.1 The Port Statistics Graph Screen Use this screen to look at a line graph of packet statistics for each physical port. To access this screen, click Port Statistics in the Status screen and then the Switch to Graphic View Button. UAG Series User's Guide 93