ZyXEL VSG-1200 V2 User Guide - Page 225
Utilities Menu, Main Menu
View all ZyXEL VSG-1200 V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
VSG-1200 V2 User's Guide In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. To return to the Main Menu screen, press 3. Figure 171 SMT: Utilities Menu Utilities Menu 1)Firmware Upgrade 2)Change Password 3)Return to Main Menu Enter selection: Enter a numeric between 1 and 3. 32.9.1 Firmware Upgrade Note: You MUST run a TFTP server on a computer where a firmware file is stored to upgrade the firmware on the VSG. You MUST have a WAN/LAN connection between the VSG and the TFTP server computer at the same time. Follow the steps below to configure the TFTP settings in the SMT. 1 Connect the computer directly to the VSG through the console port. Refer to the section on establishing a console port connection for more information. 2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. 3 Type 1 and press [ENTER] to display the Firmware Upgrade screen. 4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP Address field. 5 Specify the name of the firmware file in the Download Filename field. Figure 172 SMT: Firmware Upgrade Firmware Upgrade TFTP Server IP Address :172.21.4.72 Download Filename :vsg1200v105.bin E)xecute Download Enter Selection: R)eturn to Main Menu M)odify Enter the command key and press enter. 225 Chapter 32 Using The SMT