ZyXEL ZyWALL USG 50 User Manual - Page 171

Chapter 9 Monitor Table 26 Monitor > System Status > Port Statistics (continued) LABEL DESCRIPTION Stop Click this to stop the window from updating automatically. You can start it again by setting the Poll Interval and clicking Set Interval. Switch to Graphic View Click this to display the port statistics as a line graph. # This field displays the port's number in the list. Port This field displays the physical port number. Status This field displays the current status of the physical port. Down - The physical port is not connected. TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time System Up Time Speed / Duplex - The physical port is connected. This field displays the port speed and duplex setting (Full or Half). This field displays the number of packets transmitted from the ZyWALL on the physical port since it was last connected. This field displays the number of packets received by the ZyWALL on the physical port since it was last connected. This field displays the number of collisions on the physical port since it was last connected. This field displays the transmission speed, in bytes per second, on the physical port in the one-second interval before the screen updated. This field displays the reception speed, in bytes per second, on the physical port in the one-second interval before the screen updated. This field displays how long the physical port has been connected. This field displays how long the ZyWALL has been running since it last restarted or was turned on. ZyWALL USG 50 User's Guide 171