ZyXEL ZyWALL USG 50 User Manual - Page 184
Monitor > System Status > Cellular Status continued
View all ZyXEL ZyWALL USG 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Chapter 9 Monitor Table 35 Monitor > System Status > Cellular Status (continued) LABEL DESCRIPTION Connected Device This field displays the model name of the cellular card. Status No device - no 3G device is connected to the ZyWALL. No Service - no 3G network is available in the area; you cannot connect to the Internet. Limited Service - returned by the service provider in cases where the SIM card is expired, the user failed to pay for the service and so on; you cannot connect to the Internet. Device detected - displays when you connect a 3G device. Device error - a 3G device is connected but there is an error. Probe device fail - the ZyWALL's test of the 3G device failed. Probe device ok - the ZyWALL's test of the 3G device succeeded. Init device fail - the ZyWALL was not able to initialize the 3G device. Init device ok - the ZyWALL initialized the 3G card. Check lock fail - the ZyWALL's check of whether or not the 3G device is locked failed. Device locked - the 3G device is locked. SIM error - there is a SIM card error on the 3G device. SIM locked-PUK - the PUK is locked on the 3G device's SIM card. SIM locked-PIN - the PIN is locked on the 3G device's SIM card. Unlock PUK fail - Your attempt to unlock a WCDMA 3G device's PUK failed because you entered an incorrect PUK. Unlock PIN fail - Your attempt to unlock a WCDMA 3G device's PIN failed because you entered an incorrect PIN. Unlock device fail - Your attempt to unlock a CDMA2000 3G device failed because you entered an incorrect device code. Device unlocked - You entered the correct device code and unlocked a CDMA2000 3G device. Get dev-info fail - The ZyWALL cannot get cellular device information. Get dev-info ok - The ZyWALL succeeded in retrieving 3G device information. Searching network - The 3G device is searching for a network. Get signal fail - The 3G device cannot get a signal from a network. Network found - The 3G device found a network. Apply config - The ZyWALL is applying your configuration to the 3G device. Inactive - The 3G interface is disabled. Active - The 3G interface is enabled. Incorrect device - The connected 3G device is not compatible with the ZyWALL. Correct device - The ZyWALL detected a compatible 3G device. Set band fail - Applying your band selection was not successful. Set band ok - The ZyWALL successfully applied your band selection. Set profile fail - Applying your ISP settings was not successful. Set profile ok - The ZyWALL successfully applied your ISP settings. PPP fail - The ZyWALL failed to create a PPP connection for the cellular interface. Need auth-password - You need to enter the password for the 3G card in the cellular edit screen. Device ready - The ZyWALL successfully applied all of your configuration and you can use the 3G connection. 184 ZyWALL USG 50 User's Guide