eMachines EL1800 Service Guide - Page 77
Follow these instructions to install an add-on card
View all eMachines EL1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Follow these instructions to install an add-on card: 1. Remove a blanking plate from the system case corresponding to the slot you are going to use. 2. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. 3. Secure the metal bracket of the card to the system case with a screw. For some add-on cards, for example graphics adapters and network adapters, you have to install drivers and software before you can begin using the add-on card. 71
71
Follow these instructions to install an add-on card:
1.
Remove a blanking plate from the system case corresponding to the slot you are going to
use.
2.
Install the edge connector of the add-on card into the expansion slot. Ensure that the edge
connector is correctly seated in the slot.
3.
Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network adapters, you
have to install drivers and software before you can begin using the add-on card.