eMachines ET1161 8512161 - eMachines Desktop Hardware Reference Guide - Page 54

If you are adding a new drive, set the jumper

Page 54 highlights

Chapter 4: Upgrading Your Computer 3 Loosen the captive thumbscrew that secures the hard drive cage to the computer. (This screw cannot be removed.) Hard drive cage thumbscrew 4 Remove the hard drive cage from the computer. 5 If you are replacing a drive, remove the screws that secure the hard drive to the hard drive cage, then slide the old hard drive out of the cage. Hard drive screws (top) Hard drive screws (bottom) Hard drive screws (top) Hard drive screws (bottom) 6 If you are replacing a drive, note any jumper settings on the old drive and set the jumper on the new drive to be the same. - OR - If you are adding a new drive, set the jumper as instructed by the drive's user guide. 7 Slide the new hard drive into the cage, then secure it to the cage using either the four screws you removed previously or screws provided with your new drive. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

Chapter 4: Upgrading Your Computer
48
3
Loosen the captive thumbscrew that secures the hard
drive cage to the computer. (This screw cannot be
removed.)
4
Remove the hard drive cage from the computer.
5
If you are replacing a drive, remove the screws that
secure the hard drive to the hard drive cage, then slide
the old hard drive out of the cage.
6
If you are replacing a drive, note any jumper settings
on the old drive and set the jumper on the new drive
to be the same.
- OR -
If you are adding a new drive, set the jumper as
instructed by the drive’s user guide.
7
Slide the new hard drive into the cage, then secure it
to the cage using either the four screws you removed
previously or screws provided with your new drive.
Hard drive cage thumbscrew
Hard drive screws (top)
Hard drive screws (bottom)
Hard drive screws (top)
Hard drive screws (bottom)