iRobot Roomba 560 Product Manual - Page 18
Wireless Command Center - 9 beeps
View all iRobot Roomba 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Wireless Command Center (optional accessory for selected models) The Wireless Command Center lets you conveniently control Roomba's functions. You can use it to turn Roomba on and off, schedule Roomba to clean, and steer Roomba around your room. Troubleshooting Light ... Battery Indicator . . . SPOT CLEAN . . . Roomba spirals approximately three feet in diameter and then spirals back to where it started, intensely cleaning a local area. Roomba automatically calculates the room size and adjusts its cleaning time appropriately. Models 570-599 Roomba attempts to dock on the Home Base, if present. Models 600+ Roomba enters Max mode and cleans as long as the battery allows. Pairing Roomba with the Wireless Command Center Wireless Command Centers are set up to control only one Roomba. To pair a Wireless Command Center with a Roomba, you need four "AA" batteries (not included). 1 Make sure Roomba's battery is fully charged. 2 Unplug the power supply or remove Roomba from its Home Base. 3 Install three "AA" batteries into the Command Center. 4 Hold down the left drive button while installing the fourth battery. 5 Continue holding the button for 3 seconds or until the days of the week lights flash in a sequence from right to left (Saturday to Sunday). 6 Install the battery door and place the Command Center on top of Roomba. 7 Press and hold the DAY and MINUTE buttons on the Command Center for 2 seconds. The lights on the Command Center will flash to indicate the pairing has completed, and Roomba will make a two-tone beep. 8 When the Command Center is powered on from now on, the lights will flash in sequence from left to right until Roomba is under control. 18 iRobot Roomba 500 Series