iRobot Roomba 560 Product Manual - Page 24
Clean Roomba's front wheel, Clean Roomba's cliff sensors - robot
View all iRobot Roomba 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Clean Roomba's front wheel 1 Pull firmly on Roomba's front wheel to remove it from the robot. Wheel Axle 2 Remove debris from inside the front wheel cavity. Housing 3 Remove the front wheel from its housing and clear any hair wrapped around the axle. Push firmly on the wheel axle to remove it completely from the wheel. 4 Wipe the wheel clean. 5 Re-install the wheel into the housing, and the module into the robot. Front wheels clogged with hair and debris could result in floor damage. Clean Roomba's cliff sensors 1 Wipe all four cliff sensors with a clean, dry cloth. Cliff Sensor Openings 24 iRobot Roomba 500 Series
24
iRobot Roomba 500 Series
Clean Roomba’s front wheel
1
Pull firmly on Roomba’s front
wheel to remove it from the
robot.
2
Remove debris from inside the
front wheel cavity.
3
Remove the front wheel from
its housing and clear any hair
wrapped around the axle. Push
firmly on the wheel axle to
remove it completely from the
wheel.
4
Wipe the wheel clean.
5
Re-install the wheel into the housing, and the module into the robot.
Clean Roomba’s cliff sensors
1
Wipe all four cliff sensors with a clean, dry cloth.
Cliff Sensor
Openings
Wheel
Axle
Housing
Front wheels clogged with hair and debris could result in floor
damage.