1998 Cadillac Seville Owner's Manual - Page 328

Care of Safety Belts ep belts a :an and dry. Cleaning the Outside of the Windshield and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material be on the blade or windshield. may Do not bleach or dye safety belts. If you do, it a may severely weaken them. In crash, they might not be able to provide adequate protection. Clean safety belts only with soap and mild lukewarm water. Clean the outside of the windshield with GM Windshield Cleaner, Bon Ami@ Powder (non-scratching GM P r No. 1050011. The at glass cleaning powder), windshield is clean if beads do not form when you rinse it with water. Cleaning Glass Surfaces Glass shouldbe cleaned often.GM Glass Cleaner(GM Part No. 1050427)or a liquid household glass cleaner will remove normal tobacco smoke and dust on films interior glass. Don't use abrasive cleaners glass, because they may on cause scratches. Avoid placing decals on inside rear the to window, since they may have be scraped off later. If of the abrasive cleaners are used on the inside rear window, an electric defogger element may be damaged. Any temporary license should not be attached across the defogger grid. Grime fiom the windshield will stick to the wiper blade and affecttheir performance. Clean the blade by wiping vigorously with a cloth soaked in full-strength windshield washer solvent. Then rinse the blade with water. Check the wiper blades and clean them necessary; as replace blades that look worn. Weatherstrips Silicone greaseon weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone six grease witha clean cloth at least every months. During very cold, damp weather more fiequent application may b in required. (See "Recommended Fluids and Lubricants" the Maintenance Schedule booklet.)