2012 Cadillac SRX Owner Manual - Page 368

10-28 Vehicle Care 2. Push the release lever (B) to disengage the hook and push the wiper arm (A) out of the blade assembly (C). 3. Push the new blade assembly securely on the wiper arm until the release lever clicks into place. 4. Replace wiper cover. To remove the wiper blade: 1. Lift the wiper arm away from the windshield. Headlamp Aiming The headlamp aiming system has been preset at the factory. If the vehicle is damaged in an accident, the aim of the headlamps can be affected and adjustment could be necessary. It is recommended that a dealer adjust the headlamps. To re-aim the headlamps yourself, use the following procedure. The vehicle should be properly prepared as follows: . A. Wiper Arm B. Release Lever C. Blade Assembly . The vehicle should be placed so the headlamps are 7.6 m (25 ft) from a light-colored wall. The vehicle must have all four tires on a level surface which is level all the way to the wall.