2012 Cadillac SRX Owner Manual - Page 377
2012 Cadillac SRX Manual
Page 377 highlights
Vehicle Care Front Turn Signal Lamp (Base and Uplevel) To replace the Front Turn Signal Lamp: 1. Remove the turn signal lamp bulb socket from the headlamp assembly. 2. Remove the turn signal lamp bulb from the socket. 3. Replace the bulb in the bulb socket. 4. Install the bulb socket in the headlamp assembly. 5. For driver side, reinstall the underhood electrical center cover by latching three clips. 6. For passenger side, reinstall the air filter/cleaner assembly base by pushing to seat . Verify the base is seated securely, then install the engine air filter/ cleaner assembly. 10-37 Turn Signal Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 214. 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten from snap tabs. A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove.