2012 Cadillac SRX Owner Manual - Page 378

10-38 Vehicle Care 8. Press a new bulb into the socket, insert it into the taillamp assembly and turn the bulb socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws. 10. Reinstall the taillamp cover by snapping it into place. 11. Push the push pin to secure the taillamp cover. Back-Up Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2￿14. A. Turn Signal Lamp B. Back-Up Bulb/Socket 6. Turn the turn signal lamp (A) bulb socket counterclockwise to remove it from the taillamp assembly. 7. Pull the bulb straight out from the socket. A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten from snap tabs.