2012 Cadillac SRX Owner Manual - Page 40

2-8 Keys, Doors, and Windows 5. Press the ignition. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press K on the transmitter. To program additional transmitters, repeat Steps 4 through 6. 4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area located between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket. When all additional transmitters are programmed, press and hold the ignition for 10 seconds to exit programming mode. 2. Wait for ten minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press the ignition. The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT. 3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.