2002 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 12

Memory Seat (If Equipped) If your vehicle has this feature, the buttons used to program and recall the driver's seat and recliner position are located on the driver's door trim panel. Heated Front Seats (If Equipped) If your vehicle has this feature, the button used to control the driver's heated seat is located on the driver's door panel. The button used to control the passenger's heated seat is located on the passenger's door panel. It does not store the lumbar or back support positions. To program the memory seat, do the following: 1. Adjust the driver's seat to the desired position. 2. Then press the SET button and, within five seconds, press one of the two numbered buttons on the memory control. To recall your setting, put the vehicle in PARK (P) and press the number you chose. To program the seat position for a second driver, follow the preceding steps, but press the other number on the memory control. To activate the heated seats, press the button once for the HI heat setting. Press the button again for the LO heat setting. To turn off the heated seats, press the button a third time. An indicator light will illuminate for each heat setting anytime the heated seats are operating. The ignition must be in RUN for this feature to operate. The heated front seats will be canceled after the ignition is turned to OFF. If you still want to use the heated front seat feature after you restart your vehicle, you will need to press the heated seat button again. 1-5