2004 Chevrolet Cavalier Owner's Manual - Page 107

Reducing Speed While Using Cruise Control There are two ways to reduce your speed while using cruise control: Using Cruise Control on Hills How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up a steep hill, you may have to step on the accelerator pedal to maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speed down. Of course, applying the brake or clutch pedal takes you out of cruise control. Many drivers find this to be too much trouble and do not use cruise control on steep hills. • Push in the button at the end of the lever until you reach the lower speed you want, then release it. • To slow down in very small amounts, briefly press the button. Each time you do this, you will go about 1 mph (1.6 km/h) slower. Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase your speed. When you take your foot off the pedal, your vehicle will slow down to the cruise control speed you set earlier. Ending Cruise Control There are several ways to turn off the cruise control: • Step lightly on the brake pedal, or push the clutch pedal, if you have a manual transaxle. • Move the cruise switch to OFF. Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. 3-9