2008 Chevrolet Uplander Owner's Manual - Page 12

4. Release the rear set of seat hooks from the floor pins by pulling the nylon strap, located at the base of the seat. Use the strap to guide the seat forward. 3. Pull the nylon strap, located on the rear right hand side of the seat, or lift the recline lever, located on the front right hand side of the seatback, to raise the seatback to the upright position. {CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. 4. Push and pull on the seatback to check that it is locked. One of the bucket seats may be equipped with a built-in child restraint. See Built-In Child Restraint on page 1-68. To return the seat to the original position, do the following: 1. Align the seat so that the rear hooks on the seat are over the rear floor pins. Push down firmly on the rear of the seat so that the rear hooks attach to the rear floor pins. 2. Try to raise the seat to check that it is locked to the floor. 1-8